how to correct idle status on lexmark x1270 printer

#How to correct idle status on lexmark x1270 printer driver
#How to correct idle status on lexmark x1270 printer windows

HINT: This is the first part of the fully qualified domain name, e.g. Identify the host name on the network settings page.The host name used to create the original port has been changed.īecause a port can be created using a host name, any change in host name on the printer can render the selected port invalid. Click here for instructions on how to delete and reconfigure a port.Īfter creating a new port, try printing again.ĥ.Verify Status - Connected on the network settings page.Identify the IP address under TCP/IP on the network settings page.Since the printer port is bound to the IP address, any IP address change on the printer can render the selected port invalid. The printer was turned off for an extended period of time.The printer was disconnected from the network and moved to a different segment on the network.A printer or network adapter has been replaced.A network administrator failed to properly configure the DHCP server.The printer or MFP network adapter has been reset.This can happen for any of the following reasons: A newly administered DHCP IP address has been configured on the printer. HINT: The Description and Printer values will help identify the correct port.Ĭlick here for instructions on how to delete and reconfigure a port.Īfter creating a new port, try printing again.Ĥ. Scroll down the complete list of of available ports.Place a checkmark next to the correct port.Ĭlick on the General tab, then select Print test page.The port is set to USB00?, LPT?, File, or other. A print queue or queue-based print sharing condition.Duplicate IP address is causing network traffic collisions.

The Host name used to create the original port has been changed.The printer has picked up a new DHCP-administered IP address, which renders the existing port useless.The original port is not immediately visible.

#How to correct idle status on lexmark x1270 printer driver

Right-click on the printer icon and select Properties from the drop-down menu.īecause the port binds the printer software driver to the print server, (NIC, INA, network adapter, or wireless network adapter) improper configuration or selection of this port will result in print failure.

#How to correct idle status on lexmark x1270 printer windows

In Windows Vista, click Start > Control Panel > Hardware and Sound > Printers. In Windows XP, click Start > Settings > Printer and Faxes, or Start > Control Panel > Printers and Faxes. Open the Printers or Printer and Faxes folder and locate your printer object. If you have not done so already, print the Network Settings Page. Please consult the User's Guide if unfamiliar with this procedure. If you are unfamiliar with the topics covered in this article or would like additional assistance, please contact Lexmark Technical Support for additional assistance.It is important to understand that the following topics are not listed in any particular order as there are many reasons for print failure.This article assumes that you have already verified network connectivity by performing a ping test using the printer's TCP/IP address, or that you have successfully accessed the printer's embedded web server.You have not confirmed network connectivity with the printerĬlick here for an article that describes network communication topics. See Print Failure Diagnosis topics below. You have confirmed network communication to the printer It is important to differentiate between communication failure and print failure. The following topics are covered in this article: When attempting to print, you receive Communication Not Available or Document Failed to Print error messages, or no message at all.